CGOLDENWALL · 40 products
CGOLDENWALL grain mills, lab scales and food machines
Grinders, balances, lab instruments and kitchen machines, sorted by the job each one does.
Where most shoppers start
CGOLDENWALL 300g Electric Grain Mill With Safety Lid
300g electric grain mill, 1500W, 70-300 mesh
Check price on Amazon
CGOLDENWALL 500g x 0.001g Analytical Balance PYX-35
500g x 0.001g analytical balance with windshield
Check price on Amazon
CGOLDENWALL 80-2 Electric Lab Centrifuge 4000RPM
80-2 lab centrifuge, 4000rpm, 12 tubes of 20ml
Check price on Amazon
CGOLDENWALL 10 Inch Electric Meat Slicer 240W
10 inch electric meat slicer, 240W
Check price on AmazonElectric grain mill grinders and spice mills
Ten mills for dry grains, spices and herbs, from a 150g countertop spice grinder to a 2500g commercial tank and a continuous-feed hammer mill. Home kitchens grinding coffee beans or star anise sit at the small end; flour mill buyers and shops milling corn or wheat work from the 1000g models up. A hand-crank mill with a table clamp covers kitchens that want no motor at all.
CGOLDENWALL 150g Small Electric Spice Grinder 850W
Countertop mini grinder for quick batches of dry spices, seasonings and coffee beans.
- Capacity 150g
- Power 850W, speed 28000r/min
- Three-layer stainless steel blades
- Fineness 70 to 300 mesh
- Working time no more than 3min
- Removable blades, non-detachable container
CGOLDENWALL 300g Electric Grain Mill With Safety Lid
Compact upright grinder mill that turns small batches of dried materials into fine powder.
- Capacity 300g
- Power 1500W, speed 28000rpm
- Grinding fineness 70-300 mesh
- Lid induction switches stop the motor when opened
- Overload protector with 0-5 min timer switch
- Warranty: 1-Year
CGOLDENWALL 800g LED Timer Grain Mill Grinder
Swing grain mill with a digital timer for repeatable grinding of dried materials.
- Capacity 800g
- Power 2400W, speed 28000r/min
- LED timer: 1-5min and 10-50sec
- 270° swing body
- Fineness 70 - 300 mesh
- Warranty: One-Year
CGOLDENWALL DF-15 Continuous Hammer Mill Grinder
Continuous-feed hammer mill for small production runs of dry grains and spices.
- Rotate speed 20000r/min
- Coarse crushing yield 1 ~ 15kg/h
- Fine crushing yield 1 ~ 3kg/h
- Interchangeable mesh screens for fineness
- Continuous grinding into a bag
- 1-year warranty
All grain and spice mills 10 items
CGOLDENWALL precision lab scales and analytical balances
Scales here run from a 220g analytical balance reading 0.1mg to a 30kg counting scale for inventory work. Milligram models with a windshield suit lab samples and jewelry; the 5kg and 10kg bench scales trade fine readability for a wider pan. Choose by the heaviest load first, then by the smallest division the work needs.
CGOLDENWALL 220g x 0.1mg Analytical Balance
Four-decimal analytical balance for lab weighing at 0.0001g readability.
- Capacity 220g, readability 0.1mg
- Electromagnetic force compensation
- Aluminum alloy die cast base
- RS232C interface
- Units g/mg/ct/oz, counting, tare
- 2 – 3 s stabilization time
CGOLDENWALL 500g x 0.001g Analytical Balance PYX-35
Milligram lab scale with a windshield for weighing small samples up to 500g.
- Capacity 500g, readability 0.001g
- Windshield with stainless steel weighing platter
- 13 units conversion, tare and counting
- Blue backlit LCD display
- Calibration weight included
- Model PYX-35
CGOLDENWALL 5000g x 0.01g Lab Scale CNA 663H
Centigram laboratory balance on a wide pan for heavier samples up to 5000g.
- Capacity 5000g, readability 0.01g
- 180* 140mm stainless steel weighing pan
- Adjustable feet and level bubble
- 13 units conversion, tare, counting
- Calibration weights not included
- Part number CNA 663H
CGOLDENWALL 30kg Industrial Counting Scale GS-11
Inventory scale that counts small parts and coins with a quantity alarm.
- Capacity 30kg/66lb, accuracy 0.1g
- 11.4X9 inch stainless steel weighing plate
- Units g/kg/lb
- Tare, counting, accumulation, quantity alarm
- Plug-in power; 6V 4h battery sold separately
- Model GS-11
All lab scales and balances 10 items
Lab centrifuge, viscometers and ultrasonic homogenizers
Bench instruments for small labs and workshops: a 4000rpm low-speed centrifuge, three rotational viscometers, three ultrasonic homogenizers, two liquid nitrogen dewars and a turbine flow meter. These machines measure, separate or process samples rather than weigh them, which is where the scale line ends. Each one has a stated working range, so match it to the sample before anything else.
CGOLDENWALL 80-2 Electric Lab Centrifuge 4000RPM
Benchtop low speed centrifuge for separating samples in small biochemical labs.
- Max speed 4000rpm, adjustable from 0
- Capacity: 20ml × 12 tubes
- Max centrifugal force 2325xg
- Timer range 0-120min or continuous running
- Transparent glass lid, noise under 70 dB
- Voltage 110V
CGOLDENWALL NDJ-5S Digital Rotational Viscometer
Digital rotary viscometer for checking the viscosity of oils, paints and other liquids.
- Range 1mPa.S-100,000mPa.S
- Measurement error ±3%
- 5 rotors (No. 0-4), 4 speeds
- Speeds: 6, 12, 30, 60 rpm
- Blue backlit LCD display
- Voltage 110-240V
CGOLDENWALL Handheld Ultrasonic Homogenizer 8mm Probe
Portable probe sonicator, used by hand or on its stand, for small sample volumes.
- Probe diameter Φ8mm, titanium alloy
- Maximum power 300W
- Frequency 30KHz
- Processing capacity 50mL~300mL
- Stainless steel bracket included
- Overheating protection
CGOLDENWALL 6L Liquid Nitrogen Dewar Tank
Six-liter cryogenic container for storing and carrying small amounts of lab samples.
- 6L tank size
- Compact 50mm caliber
- Aerospace aluminum construction
- 6 canisters, 36 mm × 110 mm
- Carry bag included
- Ships as an empty tank
All lab equipment 10 items
CGOLDENWALL oil presses, slicers and kitchen machines
Food machines for home cooks and small counters: oil press machines for home and small commercial use, a 10 inch meat slicer, a 200W food slicer, a #10 meat grinder, a tornado potato slicer, a pasta maker and a corn dog waffle maker. The mills grind dry material to powder; these machines press, slice, mince, extrude and bake. Several are 110V, so check the outlet before ordering.
CGOLDENWALL K28 Automatic Oil Press Touch Screen
Electric oil expeller with cold and hot modes and a touch control panel.
- 5.25 inch LCD touch screen
- 6 heat levels: 140°-240°
- Cold and hot pressing modes
- Built-in thrust bearing in the motor
- More than 24 kinds of materials
- Voltage 110V
CGOLDENWALL 10 Inch Electric Meat Slicer 240W
Semi-auto deli slicer for meats, cheese and bread in home or shop kitchens.
- 10-inch chromium-plated steel blade
- 240W all-copper motor, 1440RMP
- Thickness 0 to 1/2 inch
- Cast aluminum body
- Built-in sharpener and transparent shield
- Size 18.5*16.5*15.4inches
CGOLDENWALL #10 Electric Meat Grinder and Sausage Stuffer
Heavy duty mincer with stuffing tubes for venison, pork and homemade sausage.
- #10 grinding head
- About 480 lbs/hour
- Copper motor, 2 capacitors
- 2 blades, 3 plates: fan-shaped/8mm/5mm
- 3 sausage tubes, Kubbe attachment, food pusher
- Speed settings with reverse function
CGOLDENWALL Automatic Pasta Maker 12 Shape Discs
Countertop noodle machine that kneads and extrudes fresh pasta in about 10 minutes.
- Up to 650g flour per batch
- 12 shape discs, 2 measuring cups
- Power 260W, 110V
- Fresh noodles in 10 minutes
- Dishwasher-safe detachable parts
- Size 10*13.4*8.3Inches
All kitchen machines 10 items
How CGOLDENWALL equipment is built
Lid switches and overload protection on the mills
The electric grain mills carry lid induction switches, so the grinder will automatically stop when the lid is lifted. An overload protector sits in the machine body as well; on the 700g model it works with replaceable carbon brushes. When a motor is overloaded or starts to overheat, the protector cuts power before the motor is damaged.
Three-layer stainless steel blades at 28000 to 32000rpm
Most electric mills turn three-layer blades at 28000rpm, and the 2000g and 2500g tanks run at 32000rpm. That speed is what takes dried materials down to a 70-300 mesh range. The long blade sits at the bottom of the tank, and the load must cover the long blade to grind evenly.
Electromagnetic force compensation in the 220g balance
The 220g analytical balance reads to 0.1mg on an electromagnetic force compensation sensor, set on an aluminum alloy die cast base. It settles in 2 – 3 s and sends readings to a computer through an RS232C port. The milligram scales use stainless steel weighing platters inside a windshield for high sensitivity work.
304 stainless steel on the hand-operated machines
The manual grain mill and both manual oil presses are built from 304 stainless steel, handle included on the presses. None of them needs a socket. The CNA 791 mill clamps to a table with an anti-slid rubber pad, and its fineness changes by spring adjustment from coarse to fine.
Materials and care across the range
Grinding tanks, weighing pans and the press bodies are stainless steel; the 80-2 centrifuge has a transparent glass lid, the meat slicer a cast aluminum body and a chromium-plated steel blade, and the dewars aerospace aluminum. On the 150g spice grinder the container is not detachable, so wipe it out instead of rinsing it under the tap; the blades come out for cleaning. On the pasta maker only the detachable parts go in the dishwasher.
For the grain grinder line, it is recommended to grind in short runs. Working time must stay at 3 minutes or less per run, then rest the motor for 5-10 minutes; running it too long is what trips the overload protector. Only dry, normal grains and various dried spices belong in these tanks. High-oil nuts such as peanuts and walnuts, and anything not dry enough, stay out.
Liquid nitrogen dewars ship empty, and the liquid nitrogen is sourced locally. Follow the manual for filling, handling and storage, as you would for the heated oil presses and every bladed slicer and grinder in the range.
| Mill tanks and blades | Stainless steel, three-layer blades |
|---|---|
| Manual mill and manual presses | 304 stainless steel |
| Analytical balance base | Aluminum alloy die cast |
| Scale platters | Stainless steel |
| Meat slicer | Cast aluminum body, chromium-plated steel blade |
| Dewar tanks | Aerospace aluminum |
| Flow meter | Aluminum housing, stainless steel turbine |
| Corn dog waffle maker | Stainless steel body, non-stick coating |
Match the capacity to the batch
Every mill, scale and machine with its capacity, wattage and voltage listed on the product card.
Compare the modelsWho uses CGOLDENWALL mills, scales and lab tools
A home flour mill for weekend baking
A household milling wheat, oats or rice a few cups at a time needs a tank in the 300g to 400g range. The 400g swing type grinder tilts so the flour pours straight out of the machine body. Coffee beans, pepper and cinnamon go through the same tank between grain batches.
A spice shop milling in bulk
Shops grinding dried chili, fennel or corn by the kilogram outgrow small tanks quickly. The 2500g grinder at 3600W handles bulk loads; if your batches run all day, the DF-15 hammer mill feeds continuously into a bag at 1 ~ 15kg/h coarse.
A school or teaching lab weighing samples
Student labs weigh small amounts at 0.001g and rarely load over a few hundred grams. The 300g analytical balance has a glass windshield to block drafts and a blue backlit LCD display with 13 units conversion.
A deli counter slicing to order
Coffee shops and delis cutting ham, turkey and cheese through the day use the 10 inch slicer, with thickness set from 0 to 1/2 inch. Plan for its footprint of 18.5*16.5*15.4inches on the counter.
About the CGOLDENWALL range
The catalogue covers forty products in four lines: grain and spice mills, lab scales and balances, lab instruments, and kitchen food machines. It reaches from a 150g spice grinder for a home cupboard to a 30kg industrial counting scale and a 2000W ultrasonic homogenizer for a lab bench.
Most of the electric machines are sized for small operators: a home kitchen, a café, a school lab, a workshop or a small production room. Wattage, capacity and speed are stated for each model, so the choice usually comes down to batch size and the power supply available. Several machines are 110V and the viscometer NDJ-5S runs on 110-240V.
The range suits buyers who already know what they need to grind, weigh or measure. If the task is grinding dried materials into powder, the mills apply; if you need a reading at 0.001g or 0.1mg, the analytical balances do; for viscosity, sample separation or emulsifying, the lab instruments take over.
Questions to settle before you order
Which grain mill grinder fits oily seeds like peanuts or walnuts?
How long can an electric spice grinder run at one time?
Do the lab scales come with a calibration weight?
Which balance reads 0.1mg, and which reads 0.001g?
What tubes does the 80-2 lab centrifuge take?
Does the liquid nitrogen dewar arrive filled?
CGOLDENWALL grinders and balances side by side
Capacity, power or readability, and speed for the main models in each line.
| CGOLDENWALL | Capacity | Power or readability | Speed or range | Use | Check price on Amazon |
|---|---|---|---|---|---|
| CGOLDENWALL 150g spice grinder | 150g | 850W | 28000r/min | Spices, coffee beans | Check price on Amazon |
| 300g grain mill by CGOLDENWALL | 300g | 1500W | 28000rpm | Dry grains, star anise | Check price on Amazon |
| CGOLDENWALL 1000g commercial grinder | 1000g | 3000W | 30000rpm | Wheat flour, dried spices | Check price on Amazon |
| CGOLDENWALL CNA-932 2500g mill | 2500g | 3600W | 32000rpm | Corn, wheat, oats, rye | Check price on Amazon |
| CGOLDENWALL 220g analytical balance | 220g | 0.1mg | 2 – 3 s stabilization | Lab weighing | Check price on Amazon |
| PYX-35 milligram balance from CGOLDENWALL | 500g | 0.001g | 13 units | Lab and jewelry | Check price on Amazon |
| CGOLDENWALL 80-2 centrifuge | 20ml × 12 tubes | Max 2325xg | 0-4000rpm | Sample separation | Check price on Amazon |
| NDJ-5S viscometer by CGOLDENWALL | 1mPa.S-100,000mPa.S | ±3% | 6, 12, 30, 60 rpm | Oils, paints, liquids | Check price on Amazon |
Guides to read before you buy
Best ofBest Analytical Balance: 8 Picks From OHAUS, U.S. Solid and More
Best analytical balance picks from OHAUS, U.S. Solid, CGOLDENWALL, Hanchen, JOANLAB, LICHEN and AWWNUIF, compared by capacity, readability and output.
Best ofBest Counting Scale: 7 Picks From My Weigh, JINXUAN and More
Best counting scale picks from My Weigh, JINXUAN, CGOLDENWALL, LNXDMWMS and MEIYA for parts, coins and stock, compared by capacity and readability.
Best ofBest Electric Grain Mill: 8 Picks From NutriMill to CGOLDENWALL
Best electric grain mill picks from NutriMill, CGOLDENWALL, Yaofafa, BI-DTOOL, LEJIEYIN and Snowtaros, matched to bread flour, spices or feed.
Best ofBest Precision Lab Scale: 8 Picks From OHAUS, Fristaden and More
Best precision lab scale picks from OHAUS, Fristaden, UXILAII, My Weigh, SASVY and CGOLDENWALL, from 220 g to 10kg at 0.01g or 0.1g readability.
Best ofBest Spice Grinder: 8 Picks From CGOLDENWALL, OKF, BLACK+DECKER
Best spice grinder picks from CGOLDENWALL, BLACK+DECKER, OKF, SLONUVLND, Topfurn and ZKQYYM, compared by jar size, watts, speed and cleaning.
ComparisonCGOLDENWALL vs U.S. Solid Analytical Balance: Specs Compared
CGOLDENWALL vs U.S. Solid analytical balance: 220g x 0.1mg and 300g x 1mg models compared on calibration, draft shield, units, data ports and power.
Pick the readability, the capacity and the batch size
CGOLDENWALL analytical balances, lab and counting scales, grain and spice mills, centrifuges, viscometers, homogenizers, oil presses and meat slicers. Check capacity, readability, voltage and today’s price on Amazon.